After the Smart Box is installed, why does the dashcam didn't switch to parking mode after the engine is turned off?

• Related Articles

• SmartBox Power Management and Parking Mode Guidelines

  Power Cut-Off Timing When either the preset voltage or time threshold is reached, the power supply will delay shutdown for 180 seconds before cutting off power. After power is cut, the SmartBox will stop supplying power from the vehicle’s battery to ...

• What should I do if I can’t connect my phone to the Magellan Dashcam’s Wi-Fi?

  If you are unable to connect to the Magellan Mivue Pro app, try the following troubleshooting steps: Verify Dashcam Compatibility: Ensure your dashcam supports Wi-Fi functionality. Check Firmware Version: Confirm that your dashcam’s firmware is up to ...

• How does the Magellan Dashcam receive its power supply?

  The Magellan Dashcam receives power through a dedicated power cable, typically connected to the vehicle’s 12V power outlet (cigarette lighter socket) or hardwired directly to the car’s fuse box using an optional hardwire kit. Some models may also ...

• What does the parking monitoring feature do on Magellan Dashcam?

  Parking monitoring enables the dashcam to record while the vehicle is parked if it detects impact or motion. This feature requires either a built-in battery or a direct connection to the car’s battery.

• Why does the dash cam shut down shortly after the engine is turned off or before the time setting value is reached?

  Please use a multimeter to measure the voltage of the yellow line B+ of the "auxiliary fuse holder" half an hour after the engine is turned off to see if it is lower than the voltage setting value. Please readjust the voltage setting.