Why do I have set the time and voltage, but after installing the power line, the battery has insufficient power? Why does it run out of power again after replacing the battery ?

• Related Articles

• SmartBox Power Management and Parking Mode Guidelines

  Power Cut-Off Timing When either the preset voltage or time threshold is reached, the power supply will delay shutdown for 180 seconds before cutting off power. After power is cut, the SmartBox will stop supplying power from the vehicle’s battery to ...

• After the car has been parked abroad for several days, the battery output is insufficient ?

  Please note that if the vehicle is turned off for a long time, the vehicle's electronic devices will continue to consume power. If the vehicle is left idle for a long time, the battery may be low and the vehicle may be unable to start.

• Quick Start Guide (QSG) for Magellan Fuse Box Power Adapter

  Download and print the Quick Start Guide (QSG), which provides instructions on setting up your Magellan Fuse Box Power Adapter. Please read this guide carefully before installation. If you’re not familiar with vehicle wiring or fuse box connections, ...

• Do I need to manually set the date and time on Magellan Dashcam?

  The Magellan Dashcam will automatically set the date and time using the GPS signal once a connection is established.

• Why does the dash cam shut down shortly after the engine is turned off or before the time setting value is reached?

  Please use a multimeter to measure the voltage of the yellow line B+ of the "auxiliary fuse holder" half an hour after the engine is turned off to see if it is lower than the voltage setting value. Please readjust the voltage setting.